Aromamatic Products Pty Ltd


Mistique - User Manual

Mistique Aromamist Diffuser

How to Use your Ultrasonic Mist Diffuser

Before you connect the power supply to the wall socket follow these steps:
Plug the power supply into the base of the diffuser, ensuring the cord is sitting flat.
General Warning: Do not operate the diffuser in any area in the home or office where the diffuser mist may directly contact valuable furniture or electrical devices, e.g. Computers, TV, Mobiles phones, ect.

Click to see Product Features

Download PDF Mistique User Manual


Initial Setup

Before you connect the power supply to the wall socket follow these steps:

1. Plug the power supply into the base of the diffuser, ensuring the cord is sitting flat.

2. Lift the Ceramic case from the diffuser base, them remove the plastic lid from the base unit.

3. Place the base unit of the diffuser on a stable flat surface. Using the measuring cup provided, add up to 100ml of cold tap water to the level indicated on the side of the water reservoir. Use only cold tap water.

Do not exceed the water level when filling the water tank. Use only cold tap water. Never use warm or hot water.

4. Add a few drops of your favourite pure essential oil or essential oil blend to the water tank.
Use only pure essential oils or blends as any other oils may contain impurities that will affect the diffuser operation and nullify any warranty claims for faulty operation.

5. Gently place the diffuser cover back on top of the base unit, then carefully replace the ceramic case firmly over the plastic cover on the base unit.
Do not move or open the diffuser during operation.

Once you have completed the above steps, connect the diffuser to the power supply and turn on at the power point.

Ensure the diffuser is out of the reach of children and pets


Mist Operation

To switch on the mist operation, press the “Mist" button.

Continuous Mist Mode: Press the “Mist" button once, and you will hear a beep..

This beep indicates the continuous mist mode, This mode setting will operate fro a approx. 3-4 hours.

The diffuser will automatically shut off after this period.

Intermittent Mist Mode: Press the “Mist” button a second time. The second beep indicates the intermitten mist mode, which is approx. 30 seconds On / 30 seconds Off. The diffuser will automatically shut off after this period.

When changing the mist mode, you will hear a single beep. 

When the water level is low in the water tank, the unit will immediately switch off, even when the power is connected.

At any time, if you press the mist switch for longer than one second, the electric alarm sounds and then turns off.

Note:  If the water tank is empty the diffuser will not start and you will hear 3 beeps.


Light Operation

The light operates independently to the mist and may be used together or separately.

To switch on the light operation, press the “Light” button.

Multi-Light Colour Mode: Press the “Light” button once you will hear a single beep.

The LED lights will rotate through their colour cycle, changing from soft tones to bright tones.

Single Colour Mode: To choose a single colour, press the light button on the colour of your choice.

To change your choice, press the bottom again cycling through the colours to choose another option.

White Colour Mode: Follow the single colour mode instructions until you reach the white colour.

Then choose either the soft warm light or the white night light.

To change from single mode to multi-light mode, you will need to turn off the light.

To turn OFF the light, press and hold the “Light” button, until you hear 2 beeps.



Cleaning & Maintenance

The diffuser MUST be cleaned at regular intervals to remove impurities and residue to ensure the correct operation of the unit.

1. Turn off the power point and unplug the cord from the base of the unit.

2. Add a 1 small tablespoon of Citric Acid to 100ml luke warm water into the water tank and allow to stand for 5 to 10 minutes. (Citric Acid is available in leading supermarkets)

3. Empty the luke warm water solution from the Drain Side of the tank.


4. Add 60ml of luke warm water and lightly rinse, taking care not to splash the water.

5.  Repeat Step 3.

6. Set aside and allow unit to dry before re-using.

7. To clean the top cover of the diffuser, simply rinse it with luke warm water and dry with a soft cloth.

Note: Avoid using any cleansing agents with either the top or base unit. NEVER immerse base unit in water

International Plugs

Australian Plug, 2 pin – 240 volts
British Plug 220 / 240 volts

Guarantee & Warranty

Aromamatic Products Pty Ltd Guarantees the Mist Diffuser for a period of one year from the date of purchase if found defective by the manufacturer or their approved agent.

This Guarantee does not include replacement of a unit damaged or broken by internal or external damaged or to external damage to the power adapter, electrical cable or power plug. Incorrect use of the Mist Diffuser will nullify any warranty claim.

Please return the Mist diffuser to the place of purchase with your receipt to validate a warranty claim.

Comes with a (1) One Year Guarantee on all
electrical components.


Phone: + 61 7 5591 5859      Fax: + 61 7 5531 0054
Mail: PO Box 840 S.B.C. Southport Qld 4215 Australia.     Office: 1/12 Olympic Cct. Southport Qld 4215 Australia
Web design Gold Coast