Aromamatic Products Pty Ltd


Aromamatic 2inOne Electric Vaporizer

How to Use your 2inOne Electric Vaporizer

Plug the vaporizer into a standard electrical outlet and turn the power on. Please allow 15 minutes to reach full operating temperature. Then simply add your favourite essential oils/blends or soy wax melt to the bowl, as recommended, Take care not to overfill the vaporizer as spilled oils or wax may damage some surfaces. Click to see Product Features



When Using Essential Oils

  • Add 8-10 drops of your favourite essential oil or blend to the bowl & enjoy the aroma
  • Use only pure essential oils or essential oil blends. Products (essential oils) diluted with base/carrier oils will not vaporize
  • Take care not to overfill the vaporizer
  • Use only recommended quantities
  • Spilled oils may damage some surfaces
  • Vaporization time equates with candle burners that require both water and naked flame to operate


When Using Soy Wax Melts

  • Remove all labels or packaging from the wax melts before use
  • Add your favourite soy wax melt or tart  to the bowl & enjoy the aroma
  • Dissolving time of wax melts will vary from product to product
  • To remove used soy wax melts, let the melt cool & harden then gently dislodge it from the Vaporizer and replace with a new melt



  • Rated at 6 watts of power
  • Maximum operating cost is 8 cents a day even when switched on 24/7.
  • Self-regulating low temperature of 80o - 85produces subtle, effective vaporization
  • Fully insulated internal wiring system
  • Natural insulation characteristics of porcelain
  • Low cost economical eco-friendly 
  • Vaporizer temperature does not vary when left on continuously and will not overheat.
  • Complies with Australian relevant standards



Caring for Your Vaporizer

After your essential oil has vaporized from the bowl, wipe clean with a damp cloth. Alternatively, add 2-3 drops of essential oil or vaporizer cleanser to the warm bowl to loosen any residue that may remain.

One Year Guarantee

Comes with a (1) One Year Guarantee on all
electrical components.

International Plugs

Australian Plug, 2 pin – 240 volts
British Plug 220 / 240 volts

Touch Test

To establish whether the 2inOne Vaporizer is heating correctly please do the touch test.
The Touch Test - Turn the Vaporizer on and allow it to reach full operating temperature.
This will take around fifteen minutes, then lightly touch the centre bowl with your fingers.
If it is warm to the touch and you cannot leave your fingers in the bowl, the Vaporizer is heating and working correctly.

Phone: + 61 7 5591 5859      Fax: + 61 7 5531 0054
Mail: PO Box 840 S.B.C. Southport Qld 4215 Australia.     Office: 1/12 Olympic Cct. Southport Qld 4215 Australia
Web design Gold Coast