Plug the Multi-Light Soy Wax Warmer into a standard electrical power outlet and turn on the power. Please allow up to 15 minutes for the warmer to reach full operating temperature. Then add your favourite wax melt tart to the bowl. Take care not to overfill the warmer as spilled wax may damage some surfaces. The warmer can be operated independently of the LED lights by pressing the On/Off switch at the rear of the warmer. Always keep safe around children.
How to use Soy Wax Melts
Add your favourite soy wax melt or tart to the bowl & enjoy the aroma.
Remove all labels or packaging from the wax melts before use.
Dissolving time of wax melts will vary from product to product.
To remove used soy wax melts, let the melt cool & harden then gently dislodge it from the Vaporizer and replace with a new melt.
Wipe clean with a damp cloth.
DO NOT ADD WATER TO THE BOWL
Dimensions H 13cm x W11cm
Fully insulated internal wiring system
Maximum operating cost is 9 cents a day even when switched on 24/7
Eliminates volatile naked flame
Vaporizer temperature does not vary when left on continuously and will not overheat
Safe to handle when in use – remains cool to the touch
Self-regulating low temperature produces subtle, effective vaporization
One Year Guarantee on all electrical components
No ongoing cost of tea lights or light bulbs
Only the recessed area of the warmer emits heat
Will not overheat and remains cool to the touch
Operates between of 85o - 95o and is rated at 10 watts of power
LED lights are low voltage, low temperature and low cost
Life expectancy of LED lights is over 50,000 hours
Low cost eco-friendly appliance
Ideal as a comfort or night light
Easy to clean & maintain after use
To establish whether the Wax Melt Warmer is heating correctly please, do the touch test. The Touch Test - Turn the warmer on and allow it to reach full operating temperature. This will take around fifteen minutes, then lightly touch the centre bowl with your fingers. If it is warm to the touch and you cannot leave your fingers in the bowl, the Warmer is heating and working correctly.